Bilstein 9100 Smooth Body Series Shock Absorber

From $406.99

• Monotube gas pressure construction
• 2.0 inch or 2.65 inch (OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Series Shocks

From $1,028.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Rock Crawler Series

From $398.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9300 Series Shocks

From $880.99

• For coilover:
• Comes with ¾” teflon uniball with machined aluminum eye ring
• Hose length and fittings options: straight, 90 degree, 45 degree
• Completely owner tunable and rebuildable
• Widest range of tuning combinations within the industry
• Included spring hardware for dual-rate 3” ID springs
• Hi-flow independent rebound and compression bypass adjusters For Black Hawk
• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 ½ inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable
• California Residents: WARNING

FOX 3.0 Factory Series Smooth Body Remote Reservoir Shocks

From $664.95

• Black and zinc finish
• Body diameter: 3.0 inch
• Shaft size: 7/8 inch diameter
• Sold Individually
• California Residents: WARNING

Bilstein 9200 Series Bypass Shock Absorbers

From $1,037.00

FOX 2.0 Performance Series Coilover IFP Shocks

From $549.95

• 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
• Clear-anodized for a durable finish
• Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Large diameter, heavy-duty spherical bearing
• Direct replacement for stock and aftermarket lifts kits
• Ride height preload ring
• California Residents: WARNING

Pro Comp PRO-X Shock Absorbers

From $15.00

• 2" body diameter
• Smooth black finish
• Twin tube construction
• Nitrogen stabilized
• Velocity sensitive valving
• 1-3/8" nylon banded piston
• 5/8" chrome hardened shaft
• Optional shock boots sold separately
• On-road and light off-road

FOX 2.0 Performance Series Reservoir Shocks

From $269.95

• 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
• Clear-anodized for a durable finish
• 2.0" Smooth bore 6061-T6 Aluminum is hard anodized
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Quiet nitrile rubber allows for increased suspension articulation
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

Pro Comp PRO-M Monotube Shock Absorbers

From $119.99

• 2" body diameter
• Durable silver powder coat finish
• Monotube construction
• Nitrogen gas charged
• Vehicle specific valving
• Multi-stage disc pack
• 14mm chrome hardened shaft
• Polyurethane shock boots included
• Great feel on-road, great performance off-road

FOX 2.0 Factory Race Series Reservior Shocks

From $239.95

• 2.0" Smooth bore and honed seamless alloy bodies
• Zinc-plated and double-clear coated for long lasting finish
• 2.0" Smooth bore 6061-T6 Aluminum is hard anodized black reservoir
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design piston
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Quiet nitrile rubber allows for increased suspension articulation
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

FOX 2.0 Factory Race Series Coilover Shocks

From $289.95

• Smooth bore and honed seamless steel
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• Tunable, velocity sensitive deburred valve shims
• Reusable ORB O-ring port hose fittings for superior seal with remote reservoirs
• High-temp Viton® redundant sealing pack system with main seal, wiper seal and scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Spherical, PFTE-lined, heat-treated alloy steel
• California Residents: WARNING

FOX 2.0 Performance Series IFP Shocks

From $199.95

• 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
• Clear-anodized for a durable finish
• Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Quiet nitrile rubber allows for increased suspension articulation
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

Bilstein 7100 Classic Coilover Series Shock Absorber

From $134.00

• Monotube gas pressure construction
• Threaded body lengths to 10 inchs of travel
• Self-adjusting deflecting disc valving
• 2 inch diameter shock body
• High-flow piston reduces harshness
• Factory rebuildable
• Spherical bearing end loops, which accept 1/2 inch and 12mm mounting bolts
• Available for standard and coilover applications, this series is primarily designed for vehicles with modified shock mounts and Type I VW suspension
• California Residents: WARNING

Bilstein B8 8100 Series Shock Absorbers

From $502.00

Bilstein M 9200 Series Off Road Shocks

From $492.00

Fabtech Dirt Logic 3.0 Bypass Shocks

From $2,509.31

• 10-20 Ford F-150 Raptor
• Fits 2 in. lift
• 3.0" black Cerakote body 120 hour salt spray
• 3 tube design with 2 compression and 1 rebound
• Allows for 12" of wheel travel with stock leaf springs
• 2.75" OD billet aluminum piston
• 7/8" OD Nitrosteel black piston rod
• Viton seals
• Exotic valve stack
• 2.5" OD piggyback resi
• 5/8" spherical ball mounting ends
• Sold in a pair
• For PN[K2341DL/K2343DL]
• California Residents: WARNING

Fabtech Dirt Logic 3.0 Reservoir Shocks

From $1,557.50

• 10-20 Ford F-150 Raptor
• Fits 2 in. lift
• 3.0" black Cerakote body 120 hour salt spray
• Allows for 12" of wheel travel with stock leaf springs
• 2.75" OD billet aluminum piston
• 7/8" OD Nitrosteel black piston rod
• Viton seals
• Exotic valve stack
• 2.5" OD aluminum resi with compression adjuster
• 5/8" spherical ball mounting ends
• Sold in a pair
• Sold in a pair
• For PN[K2342DL/K2344DL]
• California Residents: WARNING

FOX 2.0 Performance Series IFP Shocking Deal

From $699.99

• The 2.0 Performance Series IFP IFP smooth body shocks give you increased ride quality and the control you need when heading into the unknown
• Proven damping technology to provide a comfortable on-road ride and predictable off-road handling in a variety of conditions
• Package includes a set of 4 Fox 2.0 Performance Series IFP Non-Reservoir shocks
• Vehicles that require struts are not included with this package
• Buy now with confidence - A service rep will contact you to confirm fitment before your order ships. If you modified your vehicle, well ensure you receive the correct package
• Some exclusions apply
• California Residents: WARNING

FOX 2.0 Performance Series Reservoir Shocking Deal

From $1,349.96

• Buy now with confidence. A service rep will contact you to confirm fitment before your order ships. If you modified your vehicle, well ensure you receive the correct shock application
• Includes Set of 4 Shocks
• Some Exclusions Apply
• California Residents: WARNING

FOX 2.5 Factory Race Series Coilover Reservoir Shocks

From $1,009.95

• 2.5" Smooth bore and honed seamless alloy body
• Zinc-plated and double-clear coated for long lasting finish
• 2.5" Smooth bore and honed seamless alloy reservoir
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• Application specific, adjustable 3.0 Eibach® racing springs
• 7/8" hard chrome plated steel shafts
• 6061-T6 hard-anodized, high flow aluminum piston
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• PTFE-lined, heat-treated, alloy steel spherical bearing
• Direct replacement for stock and aftermarket lifts kits
• Ride height preload ring
• California Residents: WARNING

FOX 2.0 Factory Race Series Air Shocks

From $374.95

• Smooth bore and honed seamless steel
• Zinc plated and clear coated for a long lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• 6061-T6 hard-anodized high-flow aluminum piston
• Tunable, velocity sensitive deburred valve shims
• Redundant sealing pack system, main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Hard chromed 4130 steel
• California Residents: WARNING

FOX 2.5 Performance Series Coilover Shocks

From $509.95

• Smooth bore and honed seamless steel body
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• Application specific adjustable 3.0" racing spring
• Race developed high flow design
• Tunable, velocity sensitive deburred valve shims
• Redundant sealing pack system, main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• 7/8" hard chrome plated, heat-treated alloy steel
• Spherical, PFTE-lined, heat-treated alloy steel bearing
• California Residents: WARNING

FOX 4.4 Factory Race Series External Bypass Shocks

From $2,449.95

• Smooth bore and honed seamless steel body
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• Stainless steel for improved performance at high temperatures
• Tunable, velocity sensitive deburred valve shims
• High-temp Viton® redundant sealing pack system with main seal, wiper seal and scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• 17-4 H900 hard chrome plated stainless steel
• Spherical, PFTE-lined, heat-treated alloy steel bearing
• California Residents: WARNING