Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Rigid Industries Lower Bumper Light Bar Mount Kits

From $116.99

• Rigid has the mounting system you're looking for to meet your vehicle's lighting needs. Install your new Rigid LED's in a variety of configurations with one of Rigid's vast selection of installation brackets, cradle mounts, tube mounts, tab mounts, windshield mounts and more.
• California Residents: WARNING

Rigid Industries Light Bar Hood Mount Kits

From $184.99

• Hood Light Bar Mount Kit
• Mounts LED E-Series/SR-Series Light
• California Residents: WARNING

Rigid Industries SR-Q Series Marine LED Lights

From $199.99

• The Wake Flame SXL underwater light from Rigid Industries LED Lighting is designed to be installed on watercraft below the waterline. The 6.2 inch x 4.7 inch oval billet aluminum housing utilizes a Triplex? coating process that is up to 5 times stronger than MIL-A-8625 (Military spec for anodic coatings). This process safely allows for the use of aluminum in salt water environments. All Wake Flame underwater lights function as a master, slave, or stand alone light system. The Wake Flame works with or without DMX controllers as well as with multiple lights. Limited Lifetime Warranty. The Wake Flame comes with all necessary hardware and a 3+ meter wire lead. The bolts used to mount the Wake Flame are visible on the Surface Mount version.
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Rigid Industries SR-Series Light Covers

From $11.99

• Available in: Black, white, clear, blue, and green
• Easy to snap on and off
• Polycarbonate plastic
• Extra layer of protection

Rigid Industries Fog Light Kits

From $199.99

• Stainless Steel Construction
• Black Powder Coat Finish
• Includes All Necessary Hardware
• Limited Lifetime Warranty
• Made in the USA
• California Residents: WARNING

Rigid Industries E/RDS Series LED Light Bar Resonance Dampers

From $19.99

Rigid Industries E-Series Light Bar Cradles

From $26.99

• For E-series lights
• Hardware included
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Rigid Industries Dually XL Series Light Cover

From $10.99

• Dually XL Series
• Light Cover
• Black
• Polycarbonate Plastic
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Lower Control Arm

From $575.00

Rigid Industries SR-Series Cradle

From $31.99

• Rigid has the mounting system you're looking for to meet your vehicle's lighting needs. Install your new Rigid LED's in a variety of configurations with one of Rigid's vast selection of installation brackets, cradle mounts, tube mounts, tab mounts, windshield mounts and more.
• California Residents: WARNING

Synergy Manufacturing Rear Stretch Bracket Kit

From $1,480.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Lift Coil Springs

From $270.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Rigid Industries 1M Extension Add A Light

From $40.99

• 14 AWG Wire
• Deutsch DT Connector
• California Residents: WARNING

Rigid Industries RDS Series Light Covers

From $13.99

• RDS Series
• Light Cover
• Black
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Axle Bracket Kit

From $175.00

• Front and Rear applications
• Various mounts included
• Made in the USA
• California Residents: WARNING

Rigid Industries SR-Q-Series Light Covers

From $13.99

• Easy to snap on and off
• Polycarbonate plastic
• Extra layer of protection
• California Residents: WARNING

Rigid Industries SR-M Series Light Covers

From $8.99

• These SR-M Light Covers from Rigid Industries are the perfect solution for style and function. With multiple color options, you can give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your SR-M LED light. Add the Amber light cover to your lights for improved visibility in snow or fog. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights.
• California Residents: WARNING